 |
| Quantity: | |
|---|---|
WOP-LE3009
Wincode Optronics
Power： AC100-240V50/60Hz 3000W
Light Source ： 864pcs 0.5W RGB LEDs&160pcs 10W white LEDs,8 segments white LED
controlled independently no uitraviolet radiation864 segments RGB
Life Time ：Over 20,000 hours for the LED light source
Output ：70,000 Im
Beam Angle： 120 degrees
Tilt angle： 190 degrees
Control mode: DMX512, automatic, master-slave, Art-Net, with RDM function
DMX Mode ：6/18/39/443/DMX channels
Dimmer： 32 bit dimmer
Operating Mode DMX Mode/Master-Slave mode/Pixel mode
Over Heat Protect With temperature sensor to extend the lamp's life
LED Scan Rate 9,000 Hz LED scan rate
Waterproof Rating ：IP65
Weight：18KG
Effect:
• Beam is a high-intensity array that provides powerful stroboscopic and masking effects
Strobe effect
Moving head strobe provides variable flash frequency, flash duration and strobe effect intensity of
the beam. It also provides the following pre-programmed effects: • Raise/lower the intensity modulation effect • Random strobe
• Spikes - low intensity light output of high intensity flashes. masking effect
For a continuous shading effect, set the flash duration to a longer value and the flash frequency to
a higher frequency
The value flashes "overlap" and merge into a continuous light output.
Power： AC100-240V50/60Hz 3000W
Light Source ： 864pcs 0.5W RGB LEDs&160pcs 10W white LEDs,8 segments white LED
controlled independently no uitraviolet radiation864 segments RGB
Life Time ：Over 20,000 hours for the LED light source
Output ：70,000 Im
Beam Angle： 120 degrees
Tilt angle： 190 degrees
Control mode: DMX512, automatic, master-slave, Art-Net, with RDM function
DMX Mode ：6/18/39/443/DMX channels
Dimmer： 32 bit dimmer
Operating Mode DMX Mode/Master-Slave mode/Pixel mode
Over Heat Protect With temperature sensor to extend the lamp's life
LED Scan Rate 9,000 Hz LED scan rate
Waterproof Rating ：IP65
Weight：18KG
Effect:
• Beam is a high-intensity array that provides powerful stroboscopic and masking effects
Strobe effect
Moving head strobe provides variable flash frequency, flash duration and strobe effect intensity of
the beam. It also provides the following pre-programmed effects: • Raise/lower the intensity modulation effect • Random strobe
• Spikes - low intensity light output of high intensity flashes. masking effect
For a continuous shading effect, set the flash duration to a longer value and the flash frequency to
a higher frequency
The value flashes "overlap" and merge into a continuous light output.
